Siemens POINTEK CLS100 Instrucciones De Operación página 12

Enclosure Version* and Fully Synthetic Process
Connection Version**
– ground
WARNING: A wet location is a location where water or other
conductive liquid may be present and is likely to increase the risk of
electric shock.
Page EN-10 Pointek CLS100 – QUICK START MANUAL
Terminal Operation
mA current loop (+V or -V)
mA current loop (-V or +V)
cable shield connection
relay**/solid state switch*
relay**/solid state switch*
*Solid State Switch
cable equiv.
Max. switching voltage: 30 V DC
red wire
or 30 V AC
black wire Max. switching current: 82 mA
cable shield
**Relay Contact Load
white wire
Max. switching voltage: 30 V AC
or 60 V DC; limited to 35 V DC or
white wire
16 V AC max. in wet locations.
Max. switching current: 1 A
Max. switching power: 60 W
A5E32146158