Siemens POINTEK CLS100 Instrucciones De Operación página 5

• enclosure version (SS process connection):
• housing: VALOX®(thermoplastic
polyester)
• lid: transparent thermoplastic
polycarbonate (PC)
• 316L stainless steel process connection:
3/4" NPT, or R 1" (BSPT), or G 1" (BSPP)
• enclosure version (fully synthetic process connection):
• housing: VALOX®(thermoplastic
polyester)
• lid: transparent thermoplastic
polycarbonate (PC)
• fully synthetic process connection:
3/4" NPT or R 1" (BSPT)
Process Conditions
• relative dielectric constant (r: 1.5 minimum
• temperature:
• pressure (vessel):
Approvals
Stainless steel process connection (integral cable or enclosure version)
(7ML5501)
• General:
• Marine:
• Dust Ignition Proof
(barrier required):
• Intrinsically Safe
(barrier required):
1.
®VALOX is a registered trademark of the General Electric Company.
A5E32146158
–30 to +100 °C (–22 to +212 °F) (enclosure version with
stainless steel process connection)
–10 to +100 °C (+14 to +212 °F) (enclosure version with
fully synthetic process connection)
–1 to 10 bar (146 psi) gauge, nominal
CE, CSA, FM
Lloyd's Register of Shipping, categories ENV1, ENV2, and
ENV5
CSA/FM Class II and III, Div. 1, Groups E, F, G
INMETRO
CSA/FM Class I, II and III, Div. 1, Groups A, B, C, D, E, F, G T4
ATEX II 1 GD 1/2GD EEx ia IIC T4 to T6 T107 °C
INMETRO: DNV 12.0082 X
Ex ia IIC T6 Ga
Ex tb IIIC T62 ºC Db
IP68
-40 ºC  Ta  +40 ºC
-20 ºC  Ta  +40 ºC (7ML5610-0...)
Ex ia IIC T4 Ga
Pointek CLS100 – QUICK START MANUAL
1
• internal 5-point terminal block
• ½" NPT wiring entrance
(optional M20 x 1.5" cable entry)
1
• internal removable 5-point terminal
block
• ½" NPT wiring entrance
(optional M20 x 1.5" cable entry)
Page EN-3