Siemens POINTEK CLS100 Instrucciones De Operación página 3

Pointek CLS100 Quick Start Manual
Note:
• Use Pointek CLS100 only in the manner outlined in this instruction manual.
• For applications in areas classified as Hazardous, observe any restrictions according to
the relevant certificate.
Pointek CLS100 is a compact 2-wire capacitance switch for level detection in constricted
spaces, interfaces, solids, liquids, slurries, and foam. The stainless steel process
connection versions (7ML5501) have an effective process temperature range of -30 to
+100 °C (-22 to +212 °F) and the synthetic process connection version (7ML5610) has an
effective process temperature range of -10 to +100 °C (+14 to +212 °F).
Pointek CLS100 versions:
• Integral cable version with stainless steel process connection and probe options of
PPS or PVDF
• Enclosure version (thermoplastic polyester enclosure) with stainless steel process
connection in combination with a PPS or PVDF probe
• Enclosure version (thermoplastic polyester enclosure) with fully synthetic process
connection combined with a PPS probe
Features
• NPT, R (BSPT), G (BSPP) process
connections
• Corrosion resistant construction,
PPS, and 316L stainless steel
(optional PVDF wetted parts)
• Non-polarized, solid-state switch or
relay output (enclosure version with
fully synthetic process connection
only)
Specifications
Power
Power supply
Standard
Intrinsically safe
A5E32146158
•
•
•
•
Fully synthetic
process connection,
enclosure version
12-33 V DC
not applicable
Pointek CLS100 – QUICK START MANUAL
Applications
Liquids, slurries, powders, granules,
and solids
Foods and pharmaceuticals
Chemical and petrochemical
Hazardous areas
Stainless steel process
connection, integral cable or
enclosure version
12-33 V DC
10-30 V DC (intrinsically safe
barrier required)
Page EN-1