Optional: Connecting An Alarm Messenger - Bosch BPT-M Touch Instrucciones De Instalación

38 | Electrical installation
BPT-M Touch | Installation manual
(4)
(5)
(1)
5.7: Wiring diagram: plug (left) and socket (right)
[1]
Not used
[2]
Not used
[3]
CAN GND
[4]
CAN H
[5]
CAN L
5.6 Optional: connecting an alarm
messenger
Materials required
 Slotted screwdriver
Connection cable (not included in the scope of

delivery) with maximum cable cross-section of 0.75
2
mm
 Alarm messenger: Alarm lamp or alarm siren (not
included in the scope of delivery)
The interface for the alarm messenger takes the form
of an electronic relay with a make contact. The power
supply for the alarm messenger must be provided
externally (maximum 30 V, 500 mA).
▶
Procedure
1. Ensure that the alarm messenger is fitted.
2. Ensure that the connection cable is connected.
3. If required, fit the end of the wire with a cable end
sleeve.
(3) (3)
(2) (2)
Bosch Power Tec GmbH
English
(4)
(5)
(1)