Look S95 Manual De Montaje página 17

GB
2/ Installing the seatpost
in the frame
1 – Make sure that the seatpost screw is
loose (the screw must still be threaded
but the elastic rings expander must not be
clamped).
2 – Adjust the height (possible every 1.25 mm
from 0 to 32,5 mm): choose the combination
of spacers among the 6 parts provided (see
table on facing page that summarizes all
possibilities) and fit the chosen spacers
under the shoulder of the seatpost. Keep at
least the following three parts.
(E-Post delivered in this configuration)
Other spacers may be added depending on
your required adjustment height
3 – Insert the seatpost in the seat tube
and position it to the stop at the top of the
connector.
4 – Tighten the seatpost screw (4 mm Allen
key to torque of 5 Nm). (Picture 5)
32
Picture 5
SPACER THICKNESS IN MM
1,25 2,5
1,25 •
2,5 •
3,75 • •
5
6,25 •
7,5 •
8,75 • •
10
11,25 •
12,5 •
13,75 • •
15
16,25 •
17,5 •
18,75 • •
20
21,25 •
22,5 •
23,75 • •
25
26,25 •
27,5 •
28,75 • •
30
31,25 •
32,5 •
GB
5 10
•
•
•
•
•
•
•
•
• •
• •
• •
• •
••
••
••
••
• ••
• ••
• ••
• ••
•••
•••
•••
33