Black and Decker GR230 Manual Del Usuario página 4

•
Only fit BS1363A approved plugs fitted
with the correctly rated fuse.
•
The cable wire colours, or a letter, will be
marked at the connection points of most
good quality plugs. Attach the wires to
their respective points in the plug (see
below). Brown is for "Live" (L) and blue is
for "Neutral" (N).
•
Before replacing the top cover of the
mains plug ensure that the cable restraint
is holding the outer sheath on the cable
firmly and that the two leads are correctly
fixed at the terminal screws.
Fit a
BS1363A
approved
plug
Connect blue
to N (neutral)
Make sure that the
outer sheath of the
cable is held firmly
by the clamp
Warning! Never connect live or neutral wires
!
to the earth pin marked "E" or
Note: Do not wire an extension cable directly
into your mower yourself. Instead, take your
mower to your nearest Black & Decker
service agent.
Increased safety can be obtained by having
a qualified electrician install a high sensitivity
(30mA) circuit breaker in the house wiring.
If you do not have such a circuit breaker
installed, or you do not wish to have one
installed, then we strongly recommend that
the electrical power to your mower be
supplied through a high sensitivity residual
current device (RCD). The RCD is designed
to provide a high degree of personal
protection against harmful electric current
should fault conditions occur.
Warning! The use of an RCD or other circuit
!
breaker unit does not release the operator of
your mower from the safety instructions and
safe working practices given in this manual.
Features (Fig. A)
A
Your purchase of a Black & Decker GR230C
range lawnmower gives you a product
combining quality with modern design and
the following features to provide safe,
efficient and easy mowing.
•
Lock-off safety switch to prevent
accidental starting of your mower.
4
Fit the
recommended
fuse
Connect brown
to L (live)
240 volts AC only.
Never use a light
socket
Carton contents
.
Mower carton containing:
•
•
•
Wheels parts pack containing:
•
•
•
•
Loose parts pack containing:
•
•
•
•
•
•
Handle assembly (Fig. B)
•
A blade brake (AUTOSTOP) for added
safety. Stops the blade rotating within
3 seconds once the switchbox lever is
released.
•
Large handle wing nuts for easy
assembly and storage.
•
Three height of cut positions which
provides the flexibility to deal with most
grass conditions.
•
The wheels are in line with the outside of
your mowers body which allows cutting
right up to the edge of the lawn.
•
Tough, durable plastic deck which will
not rust and contributes to low noise and
low vibration.
•
Powerful and efficient induction motor
which gives effective cutting and bagging
in all reasonable conditions and a low
noise level as well as low maintenance.
•
Ergonomically designed upswept handle
for comfortable use and ease of pushing.
•
Easy grassbox removal.
•
Cable restraint helps keep the cable out
of the way and prevents the cable socket
being accidentally pulled and disconnected.
Mower body.
3 part handle assembly.
2 part grassbox assembly.
4 wheels.
4 screw bolts.
4 nuts.
4 washers.
1 spanner/scraper.
4 handle wing nuts.
4 washers.
2 bolts.
User manual including guarantee card.
Service sheet.
Remove all the parts from the carton and
familiarise yourself with the individual parts of
your mower.
With your mower body on a level surface,
assemble the lower handles to your mower
body as follows: