Standard Installation - Sanyo SPWXDR124GH56A Manual Del Usuario

3-21-2. Installing the Air-intake Filter (This Page is Only for Spanish Version.)

(1) Standard installation

GB Install the filter onto the intake port. (Fig. 3-67)
FR
DE
IT
(2) If a duct is connected to the intake port:
First remove the bottom cover, and then install
the filter inside the unit. (Fig. 3-68)
PT
GR
ES
(3) If the intake is on the bottom:
Remove the intake port chamber
from the side, and then reattach
the chamber onto the bottom of
the unit. (Fig. 3-69)
DC̲Inverter̲Eng.indd 40 DC̲Inverter̲Eng.indd 40
1
Intake port
Intake port
1
2
Remove the bottom cover
and install it onto the side.
Intake port
Install the side intake port chamber on to the bottom.
40
Outlet duct
2
Fig. 3-67
Outlet duct
Remove the bottom cover
in order to remove or install the filter.
Filter
Bottom cover
Fig. 3-68
Outlet duct
2
1
Filter
Fig. 3-69
2007/07/25 13:21:42 2007/07/25 13:21:42