Kit Assembly - Metra 95-3019B Instrucciones De Montaje

ISO DDIN radio provision
1. Secure the radio brackets to the
radio using the screws supplied
with the radio. (Figure A)
2. Slide the radio/bracket/assembly in
between the radio trim panel and
the radio housing and secure with
the (6) #8 x 3/8" Phillips screws
provided. (Figure B)
3. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Test the radio for proper
operation.
4. Reassemble the dash in reverse
order of disassembly.

Kit Assembly

(Figure A)
95-3019B
(Figure B)
3