Pegasus MD Serie Instrucciones Para El Manejo página 38

Dispositivo alimentador de puntillas elásticas
Ocultar thumbs Ver también para MD Serie:
Tabla de contenido

Publicidad

メッシュカウンタ
[ 画面 ]
メッシュ カウンタ
      O F F
      O F F
[ 機能 ]
■ メッシュ生地を縫製する ( ON ) /しない ( OFF ) を選択します。
○ メッシュ生地を縫製する場合は、 『ON』にしてください。
○ メッシュ生地を縫製しない場合は、 『OFF』にしてください。
※ 初期設定は、 『OFF』になっています。
[ スイッチの説明 ]
又は
・・・・・・メッシュカウンタ機能 ON / OFF を選択します。
・・・・・・メッシュカウンタ (針数) モード画面へ進みます。
・・・・・・ 縫製画面に戻ります。
メッシュカウンタ ( 針数 )
※このモードは、 メッシュカウンタモード 『ON』 選択時に設定します。
メッシュカウンタモードが『OFF』の場合は、 表示されません。
[ 画面 ]
[ 機能 ]
■ メッシュ生地を縫製するときに設定します。
○メッシュ生地の部分を通過する針数を設定してください。
(生地センサは、メッシュ穴を生地が抜けたと判断しますので、
正しく縫製することができなくなります。メッシュカウンタモ
ードで設定した針数分だけメッシュ穴を無視することで、縫製
を可能にします。 )
○設定できる数値範囲は、 「1〜10針」です。
※ 初期設定値は、1 針です。
[ スイッチの説明 ]
・・・・・・ 針数設定値が増えます。
・・・・・・ 針数設定値が減ります。
・・・・・・ 途中切りモード画面へ進みます。
・・・・・・ 縫製画面に戻ります。
32
M e s h c o u n t e r
メッシュ カウンタ
     0 0 0 1 
M e s h c o u n t e r
     0 0 0 1 
▲ 又は ▼
メッシュ カウンタ
or
       O N
INC.
M e s h c o u n t e r
       O N
DEC.
■ To program whether mesh fabric is sewn or not by selecting
"ON" or "OFF"
○ If mesh fabric is sewn, select "ON".
○ If mesh fabric is not sewn, select "OFF". * Factory-set : "OFF"
▲ or ▼ ・・・・・・ To select "ON" or "OFF" for Mesh counter.
・・・・・・ To go to the Mesh counter (stitch counting)
・・・・・・ To return to the sewing mode display.
Mesh counter (stitch counting)
* Program this mode when "ON" is selected in the mesh counter mode.
This display is not shown with the mesh counter mode "OFF".
INC.
DEC.
■ To program this mode when mesh fabric is sewn
○ To program the number of stitches with which the machine goes
through the mesh fabric (since the fabric sensor determines the
fabric has gone through the sensor by detecting a mesh hole,
the machine cannot sew the fabric correctly. To prevent this,
program the mesh counter with the number of stitches of the
mesh hole so that the sensor will ignore it.)
○ Adjustable from 1 to 10. * Factory set 1 stitch.
・・・・・・ To increase the number of stitches.
・・・・・・ To decrease the number of stitches.
・・・・・・ To go to the Middle cutting mode display.
・・・・・・ To return to the sewing mode display.
Mesh counter
mode display.
[ Display ]
[ Function ]
[ Switches ]
[ Display ]
[ Function ]
[ Switches ]

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Md441Md641Md643Md2cW2600

Tabla de contenido