Sony MDS-JE530 Manual De Instrucciones página 38

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Naming a Track or MD
z
When "Overwrite ??" appears in step 5 above
The track or the disc selected in step 5 already has a name. If you
wish to replace the name, press AMS or YES again while the
indication appears in the display.
z
You can undo the copying of a track or disc name
For details, see "Undoing the Last Edit" on page 39.
Renaming a track or MD Z
1
Press NAME while the deck is in one of the
operating statuses listed below, depending on
what you want to rename:
To rename
Press while the deck is
A track
Playing, paused, recording, or stopped
with the track number displayed
The MD
Stopped with no track number displayed
A track or disc name appears in the display.
2
Press down CLEAR until the selected name is
erased completely.
3
Do steps 6 to 9 of "Naming a track or MD using the
controls on the deck" on page 36 or steps 2 to 4 of
"Naming a track or MD using the remote" on page
37.
4
Press NAME.
Erasing a track or disc name
Use this function to erase the name of a track or disc.
1
While the deck is stopped, playing, recording, or
paused, press MENU/NO.
"Edit Menu" appears in the display.
2
Turn AMS (or press ./> repeatedly) until
"Name ?" appears, then press AMS or YES.
3
Turn AMS (or press ./> repeatedly) until "Nm
Erase ?" appears, then press AMS or YES.
38
GB
4
Turn AMS (or press ./> repeatedly) until the
number of the track (when erasing the track name)
or "Disc" (when erasing the disc name) flashes,
then press AMS or YES.
"Complete!!" appears for a few seconds and the name
is erased.
To cancel the operation
Press MENU/NO or x.
z
You can undo the erasing of a track or disc name
For details, see "Undoing the Last Edit" on page 39.
Erasing all the names on the MD
You can erase all the track names and the disc name on an
MD in a single operation.
1
While the deck is stopped, playing, or paused,
press MENU/NO.
"Edit Menu" appears in the display.
2
Turn AMS (or press ./> repeatedly) until
"Name ?" appears, then press AMS or YES.
3
Turn AMS (or press ./> repeatedly) until "Nm
AllErs ?" appears, then press AMS or YES.
"Nm AllErs??" appears in the display.
4
Press AMS or YES.
"Complete!!" appears for a few seconds and all the
names on the MD are erased.
To cancel the operation
Press MENU/NO or x.
z
You can undo the erasing of all the names on the MD
For details, see "Undoing the Last Edit" on page 39.
z
You can erase all the recorded tracks and names on the MD
For details, see "Erasing all the tracks on an MD" on page 32.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido