Scope Of Delivery - Kärcher SB MB Manual Del Usuario

Fresh water line
The fresh water line runs from the fresh wa-
ter distributor to the float valve.
Installing the attachment set for emergency frost protection (optional)
X1 System separator
X2 Fresh water
Y1 Filter fixture - frost protection
Y2 Processed water, external frost pro-
tection shaft
-NOTICE
The attachment set for emergency frost
protection should always be connected in
the area of the fresh water inlet (building
side) so that there is adequate water supply
even if the supply pressure is low.
 Turn out the stopper R 1 1/4" from the
T-piece of the system separator (op-
tional).
 Cut the filter fixture for frost protection
according to the reduction sleeve 1" - 1/
2".
 Screw and install the parts according to
the drawing after using sealing tape.
WARNING
Follow the prescribed flow direction of the
locking valves, pipe ventilators and back-
flow valves.
 Unscrew plugs from T-piece on the 3-
way fresh water distributor.
For SB MU fresh water supply, choose
according to structural conditions.

Scope of delivery

Item: Description
110 Reduction sleeve 1 1/4" - 1/
2"
111 Double nipple 1/2"
112 Sleeve valve 1/2"
113 Pipe ventilator 1/2"
114 Sleeve 1/2"
115 Hose nipple 1/2"
116 Hose clip 1/2"
117 HOSE 1/2"
118 Solenoid valve 1/2"
Assembly instructions
3
-
EN
 Attach the double nipple, valve and
hose nipple as shown above.
 Cut the hose to the required length.
 Connect valve and float valve as shown
opposite.
119 T-piece 1/2"
Piece
120 Backflow valve 1/2"
1
-- Sealing tape
1
2
1
1
1
1
1
2
1
1
1
9