Troubleshooting; Technical Specifications; Scope Of Delivery - Kärcher RBS 6000 Serie Manual Del Usuario

Troubleshooting

DANGER
Danger from electric shock.
Work on the electrical system may only be
performed by a qualified electrician.
Before carrying out any work, disconnect
the system from the power supply by
switching the system to "0" at the main
switch and securing it against being
switched on again.
Fault
Plant is not running
Brush is does not reach re-
quired speed
Dosing pump does not
suck in spite of ventilation
and maximum dosing vol-
ume
Dosing pump sucks air
Dosing pump does not op-
erate even though the indi-
cator lamp is lit.
Spray pattern of the noz-
zles irregular.
Plant dimensions
System height
Washing height
System width
Weight
Washing station requirements
Water flow pressure
Water connection
Water consumption, approx.
Max. water temperature
Power Input
Type of protection
Ambient temperature
Humidity, max.
Sound pressure level L
pA
Uncertainty K
pA
Vibration total value on arms
Uncertainty K
Contents
loose RBS system
Carton System accessories 400 mm x 350 mm x 350 mm
Who may remedy faults?
Operator
Work designated with the sign "Operator"
may only be carried out by persons who
have been instructed in the safe operation
and maintenance on the wash plant
Electricians
Persons with a professional training in the
electro-technical area.
Customer Service
Work designated with the sign "Customer
Service" may only be done by the fitters of
Kärcher Customer Service or fitters who
have been authorised by Kärcher.
Possible cause
No power supply
Fuse defective.
Protective motor switch was triggered.
Bearings stuck.
Residue on valve seats, stuck valves.
Connection of suction valve or pressure
valve leaks.
No power supply
Dosing pump not switched on.
Fuse on transformer defective.
Nozzles are blocked.

Technical specifications

Dimensions
4500mm x 1700 mm x 1100 mm
Faults
Remedy
Check electrical mains.
Remove the cause.
Replace the fuse.
Check the current pickup.
Check the brush bearing.
Flush the suction hoses and valves.
Check the valves and suction hoses for leaks. Operator
Check power supply and ensure proper supply. Operator
Turn the dosing pump switch to position "1".
Replace the fuse.
Clean the nozzles.
mm
mm
mm
kg
mm
MPa (bar)
Inch
I/min
°C
kW
IP54
°C
%
dB(A)
dB(A)
m/s
2
m/s
2

Scope of delivery

8
-
EN
DANGER
Risk of electric shock.
Switch on the plant voltage-free, in addition
switch on the main switch to "0" and secure
it against being switched on again.
Risk of eye injuries from parts flying off or
dirt. Keep clear off rotating brushes. Gog-
gles must be worn during maintenance
work.
RBS 6012
3180
3645
1700
234
Vehicle length +4000
Vehicle width +4000
0,3...0,6 (3...6)
3/4
80
30
1,1
IPX5
+3...+50
70
65
4
<2,5
0,1
Weight
250 kg
5 kg
of whom
Qualified
electrician
Operator
Operator
Operator
Qualified
electrician
Operator
RBS 6014
4370
4205
240
Vehicle length +4000
Vehicle width +4000
0,3...0,6 (3...6)
3/4
80
30
1,1
IPX5
+3...+50
70
65
4
<2,5
0,1
19