Bonding And Grounding - Mettler Toledo 30538111 Manual De Instalación

3.3.

Bonding and Grounding

All grounding and equal potential bonding connections must be made according to local
regulations based upon the country of installation. Refer to local codes and the certificates and
control drawing in the Appendix section of this manual for more specific information regarding
grounding. Usually, regulations require that all connected pieces of equipment in an intrinsically
safe system be bonded together and grounded to a single point. An external ground lug is provided
on the battery pack (Figure 3-8) for equal potential bonding purposes.
Grounding lug
Figure 3-8: Grounding Lug
3-6 METTLER TOLEDO NiMH Battery Pack Installation/Technical Manual 64062816 | 09 | 05/2021