The 64060627 Battery Pack kit includes the 64060625 Battery Pack and a 3m (10 ft.) cable with
connector. The 30538111 Battery Pack is sold without cable, and requires a separate cable, part
number 30543268.
The battery should be located in an area close to the terminal and secured so it does not fall and
get damaged. The battery can be mounted in any orientation but it should be positioned in such a
way that contaminants cannot fall into the connector while the cable is disconnected. Mounting
hardware is not included with the battery pack and must be supplied by the installer. Refer to Figure
3-2 for the mounting dimensions.
Figure 3-2: Battery Mounting Dimensions
3-2
METTLER TOLEDO NiMH Battery Pack Installation/Technical Manual
64062816
|
09
|
05/2021