Inspection And Contents Checklist - Mettler Toledo 30538111 Manual De Instalación

1.4.3. Hazardous Areas
The 64060625/30538111 intrinsically safe battery packs are designed to operate within an area
classified as Division 1, Zone 1 or Zone 21. An area is classified as Hazardous because of the
combustible or explosive atmospheres present in those areas. Before installation, check the data
plate of the battery pack to confirm it is marked with the approval for the environment in which it
will be used.
1.5.

Inspection and Contents Checklist

Verify the contents and inspect the package immediately upon delivery. If the shipping container is
damaged, check for internal damage and file a freight claim with the carrier if necessary. If the
container is not damaged, remove the battery pack from its protective package, noting how it was
packed, and inspect it for damage.
If re-shipping the battery pack is required, it is best to use the original shipping container. The
battery pack must be packed correctly to ensure its safe transportation.
The battery pack packaging should include the following items as shown in Figure 1-1. The
64060625/30538111s do not include the cable or charger cord.
•
•
•
•
64062816 | 09 | 05/2021
DO NOT INSTALL OR PERFORM ANY SERVICE ON THIS EQUIPMENT BEFORE THE AREA HAS
BEEN SECURED AS NON-HAZARDOUS BY PERSONNEL AUTHORIZED TO DO SO BY THE
RESPONSIBLE PERSON ON SITE.
64060625/30538111
Plastic Bag
Installation and Technical manual
Documentation CD
METTLER TOLEDO NiMH Battery Pack Installation/Technical Manual
WARNING
Figure 1-1: Battery Pack Packaging
1-3