DCOOK 8087001 Manual De Instrucciones página 40

goes out, turn the temperature selector to
a slightly higher temperature until all the
fat has melted. Once it is melted, turn the
temperature selector to the required cooking
temperature. This type of fat will solidify once
the appliance cools down.
• Never switch on the appliance with an
external timer or by means of any type of
independent remote system.
• Remember, if the
on any surface, you must take care when
handling the product. This symbol indicates:
CAUTION, this surface can get very hot
during use.
• The
the surface with the highest temperature.
However, the other metallic and non-metallic
surface can also heat up considerably during
use and, as a result, you are recommended
to take care when handling them and, if
possible to use isothermal gloves or another
type of thermal protection. When in doubt as
regards the temperature of a given surface, it
is always preferable to protect yourself.
• Always unplug the appliance when it is not
symbol is always displayed on
40
symbol is displayed