Playing Discs - Alpine DHA-S680 Manual De Operación

Quick Guide
ENT
A. PROC

Playing discs

Caution • With some DVDs, certain operations
are disabled. Such operations are not
possible on such DVDs.
• The DVD functions described in this
manual are not supported by all
DVDs. See the individual DVDs
instructions for details on the features
supported.
• Fingerprints on a disc may adversely
affect playback. If a problem occurs,
remove the disc and check for
fingerprints on the playback side.
Clean the disc if necessary.
• When using the remote control, be
careful to press one button at time.
Pressing multiple buttons at the same
time may cause erroneous operation.
• Even if you switch or the Ignition Key
to OFF during playback or change the
source, playback will continue from
the point where it stopped when the
power is turned ON again.
If the magazine is removed or the disc
is changed, the play position memory
is released.
• Operation may not be accepted
depending on the type of disc and the
playback conditions. At such a time
the following mark is displayed on the
screen:
12
-EN
All manuals and user guides at all-guides.com
CHG
UP
0
9
+10
DEFEAT
DVD
Video CD
CD
: : : : :
1
Press the button.
Playback starts.
NOTES
• During play, the front panel indicators of this unit
flash.
Playing a DVD: The DVD VIDEO indicator flashes
Playing a video CD: The VIDEO CD indicator
flashes
Playing a CD: The AUDIO CD indicator flashes
• The reverse side of a double-sided DVD will not be
played automatically.
Remove the disc, turn it over, and reinsert it.
• For CDs, if repeat is OFF, there will be an automatic
changeover to the next disc after the disc finishes
playing.
• For DVD and video CD, discs will not be switched
even if repeat is OFF.
• For further information about repeat switching, see
"Chapter/track/title repeat playback" (on Page 16).
• If a menu screen appears
On DVDs and video CDs with playback control (PBC),
menu screens may appear automatically. If this happens,
perform the operation described below to start playback.
NOTE
For many discs, the menu screen can also be displayed
by pressing the MENU or TITLE button (for at least 2
seconds).
DVD menu
Use the Joystick to select the desired item, then
:
press the ENT or button.
NOTE
For some discs it is possible to select items directly from
the menu screen using the number keys ("0" to "9" and
"+10").
Video CD menu
Use the number keys ("0" to "9" and "+10") to
select the desired number.
NOTE
The menu screen does not appear when the PBC
function is turned off. If this is the case, press the
MENU button to turn on the PBC function.
DVD
Video CD