Changing The Led Indicator Setting - Alpine DHA-S680 Manual De Operación

Default Settings (SET UP)
ENT

Changing the LED indicator setting

Use the following procedure to set whether or not
the product's LED indicators are on or off.
NOTE
When the settings are changed, the old settings are
overwritten. Make a note of the current settings before
making changes. The settings are not cleared even when
the vehicle's battery is disconnected.
1
In the stop mode, press the SET button for at
least 2 seconds.
The default setting menu appears.
NOTE
This operation cannot be performed in the PRE-STOP
mode.
2
Use the Joystick to select "LED INDICATOR",
then press the ENT button.
28
-EN
All manuals and user guides at all-guides.com
3
Use the Joystick to select the "ON" or "OFF",
then press the ENT button.
ON
The LED indicators are lit, indicating the
product's operating status. "ON" is selected
upon shipment from the factory.
OFF
The LED indicators are turned off.
When "OFF" is set, the indicators do not light
even when the power is on.
NOTE
Press the RTN button to return to the previous screen.
4
Press the SET button for at least 2 seconds.
The settings are stored and the set up mode is
canceled.