Examples Of System Upgrades - Alpine DHA-S680 Manual De Operación

9
Select "ON" or "OFF" using the Joystick, then
press the ENT button.
• Set to "ON" in the following cases:
When the DHA-S680 is connected to an Ai-
NET compatible head unit or an Ai-NET
compatible AV head unit.
In this case, if set to "OFF" the DHA-S680
cannot be controlled from the head unit, and
the sound of external products (CD changer,
etc.) cannot be heard.
"ON" is set upon shipment from the factory.
• Set to "OFF" in the following cases:
When using a head unit that is not Ai-NET
compatible or another brand of head unit.
10
Press the SET button for at least 2 seconds.
The settings are stored in the memory and the
setting mode is canceled.
11
Press the V.OUT button on the remote control
unit for at least 2 seconds to turn the power off.
Disconnect the remote control sensor unit.
NOTE
When not connecting an Ai-NET compatible head unit,
do not disconnect the Remote Control Sensor Unit.
12
Turn the vehicle's ignition key off, then turn it
back on.
13
Switch the head unit's source to check that the
DHA-S680's power turns on. Insert a disc and
check that the picture and sound are properly
output.
If the power does not turn on, start the setting
procedure over from the beginning.
All manuals and user guides at all-guides.com

Examples of System Upgrades

Precautions when Making System Upgrades
•
•
•
•
•
•
After connections are completed, it will be
necessary to change the system settings of the
DHA-S680. Before installing the product, please
see page 48 and change the settings.
When connecting the DHA-S680 to a head unit
or AV head unit, do not connect the switched
power lead (ignition).
When connecting the optical digital output to an
ALPINE digital audio processor (such as the
PXA-H510 and PXA-H900), be sure to make
connection to the CHANGER connectors of the
digital audio processor optical digital input
connectors.
This arrangement allows you to enjoy Dolby
Digital 5.1 Channel Surround and other effects
even when connection is made to the
CHANGER connectors.
When using the Alpine Versatile Link Terminal
(KCA-410C) and connecting the DHA-S680,
connect the DHA-S680 Ai-NET cable to the
CHANGER1 connector of the KCA-410C.
Also note that when using the KCA-410C and
making connections, system setting changes of
the DHA-S680 will be required before connecting
the KCA-410C. See page 48 and make the
settings.
When combining the DHA-S680 and the CD
changer (CHA-S624), the optical digital output of
the CHA-S624 cannot be used.
When connecting the DHA-S680, the Alpine TV
monitor, and the AV head unit, be sure to
connect the mutual remote control input cable
(white/brown). Failing to do so will result in a loss
of remote control operation.
When making connections to another brand of
TV monitor, please use the supplied remote
control sensor unit.
FR
ES
DE
IT
SE
49
-EN