Changing The System Settings; Turning On The Power - Alpine DHA-S680 Manual De Operación

Installation and Connections

Changing the System Settings

When the DHA-S680 is connected to an Alpine AV head unit or a regular Alpine head unit, its system settings
must be made. Be sure to change the system settings before fastening the DHA-S680 in place.

• Turning on the power

Depending on the system components, the DHA-
S680's may not turn on. If so, use the procedure
described below to turn on the power.
1
Connect the remote control sensor unit to the
DHA-S680.
Remote control operation is not possible unless
the remote control sensor unit is connected.
2
Press the V.OUT button on the remote control
unit for at least 2 seconds to turn the power on.
3
Display the DHA-S680's screen on the monitor.
When using an AV head unit, switch with the
V.SEL button. When using a TV monitor, switch
with the AUX button.
This completes preparations for making the
settings. Now change the Ai-NET setting and
H.U. Control setting as described below. Do not
insert discs yet.
• Making the Ai-NET setting
Make the setting for signal transfer with the
connected Ai-NET products.
4
Press the SET button on the remote control unit
for at least 2 seconds.
The initial setting menu appears.
5
Select "CUSTOM SETUP" using the Joystick,
then press the ENT button.
6
Select "Ai-NET SETUP" using the Joystick, then
press the ENT button.
48
-EN
All manuals and user guides at all-guides.com
7
Select "DVD-CHG" or "CD-CHG" using the
Joystick, then press the ENT button.
• Set to "DVD-CHG" in the following cases:
When connection is made to the head unit
(e.g., CDA-7990/CDA-7977/CDA-7878 which
support Ai-NET and were available after
January 2001) or AV head unit (e.g., CVA-
1006/CVA-1003/IVA-C801 which support Ai-
NET and were available after January 2001).
DVD-CHG is the factory setting.
• Set to "CD-CHG" in the following cases:
1 When connection is made to a head unit
(excluding CDA-7990) which supports Ai-
NET and was available prior to January
2001 or AV head unit (e.g., CVA-1005,
CVA-1000, and IVA-C800)
When the DVD-CHG setting is made with
the aforementioned head units,
identification of the DHA-S680 will no
longer be possible and operation from the
head unit will no longer be possible.
2 When the DHA-S680 is connected using
the KCA-410C Versatile Link Terminal.
Next make the "H.U. CONTROL" setting.
• Making the "H.U. CONTROL" setting
When the DHA-S680 is connected to an Ai-NET
compatible head unit or an Ai-NET compatible AV
head unit, make the following setting so the DHA-
S680 can be operated from the head unit.
8
Select "H.U. CONTROL SETUP" using the
Joystick, then press the ENT button.