Adjusting The Surround Settings; Storing The Surround Settings - Alpine DHA-S680 Manual De Operación

Adjusting the surround settings

This adjustment is not possible when Dolby
Digital or Pro Logic is turned on for the DHA-
S680's audio output.
1
During playback, press the A.PROC button.
The setting menu appears.
2
Use the Joystick to select "SURROUND", then
press the ENT button.
3
Use the Joystick to select the surround mode,
then press the ENT button.
There are six surround modes.
4
Press the ENT button.
The level (LV) value turns yellow.
5
Use the Joystick to adjust the level (LV), then
press the ENT button.
6
Use the Joystick to select the time (echo time),
then press the ENT button.
7
Use the Joystick to adjust the time, then press
the ENT button.
NOTE
Press the RTN button to return to the previous screen.
8
Press the A.PROC button to close the digital
audio processor screen and return to the
playback screen.
All manuals and user guides at all-guides.com

Storing the surround settings

1
2
3
4
5
Six kinds of parametric EQ adjustment or setting
contents can be memorized.
During playback, press the A.PROC button.
The setting menu appears.
Use the Joystick to select "PRIVATE-
MEMORY", then press the ENT button.
Use the Joystick to select "WRITE", then press
the ENT button.
Use the Joystick to select the memory location
at which you want to store the settings
("PRIVATE-MEMORY 1" to "PRIVATE-MEMORY
6"), then press the ENT button.
NOTE
Press the RTN button to return to the previous screen.
Press the A.PROC button to close the digital
audio processor screen and return to the
playback screen.
FR
ES
DE
IT
SE
33
-EN