Alpine DHA-S680 Manual De Operación página 52

Installation and Connections
• Connecting an non Ai-NET compatible Head Unit, Digital Audio
Processor (PXA-H510/PXA-H900) and TV Monitor
DVD Changer
DHA-S680
Audio Output Video Output
Connector Connector
Remote Control Input Lead
(White/Brown)
NOTES
• When using in a system with a head unit that is not Ai-NET compatible and a digital audio processor, only connect the
DHA-S680 and digital audio processor using an optical fiber cable. Do not connect an Ai-NET output cable, or it will
not be possible to control the digital audio processor from the DHA-S680.
• When connecting only to a digital audio processor (not to a head unit that is not Ai-NET compatible), it is possible to
use both an optical fiber cable and an Ai-NET output cable. In this case the digital audio processor can be controlled
from the DHA-S680.
• When connecting another brand of TV monitor, there is no need to connect the remote control input cord (white/
brown). Use the remote control sensor unit included with the DHA-S680.
• Be sure to connect the switched Power Lead (Ignition).
• Also refer to the operating instructions of the other products in the system.
50
-EN
All manuals and user guides at all-guides.com
Remote Control
Eye Jack
Remote Control Eye
Digital Output
Terminal (Optical)
Head Unit non-compatible
Ai-NET (Sold Separately)
AUX Video Input
Terminal (AUX1)
RCA Extension Cable
Only when connecting with rear monitor
RCA Extension Cable
Remote Control Output Lead (AUX1)
(White/Brown)
Digital Input
Terminal (Optical)
(Changer)
Digital Audio Processor
PXA-H510/PXA-H900
(Sold Separately)
AV-Interface Unit
TME-M790 etc.
(Sold Separately)
AUX Audio Input
Terminal (AUX1)
Setting of DHA-S680
The DHA-S680's system settings must be
made after connections are completed.
Setting Item
Ai-NET setting
H.U.CONTROL setting
Before fixing the unit in place, refer to
page 48 to change the system setting.
Monitor
TME-M790 etc.
(Sold Separately)
Setting
CD-CHG
OFF