Connections - Alpine DHA-S680 Manual De Operación

Connections

White/Brown
Black
Fuse
Yellow
(5A)
Red
NOTES
• Connect properly.
Never connect to parts other than the ones indicated in these operating instructions.
• Also refer to the operating instructions of the other products in the system.
All manuals and user guides at all-guides.com
Cable Color Cable Specifications
• Digital Output Terminal (Optical)
This terminal is used to connect DHA-S680 to ALPINE digital audio processor
(PXA-H510 or PXA-H900).
These products include a fiber optic cable that will plug directly into the Digital
Output Terminal of the DHA-S680.
• Video Output Connector
Yellow
This connector is used in combination with the video inputs of another video
product (AV head unit or TV monitor).
White (L)
• Audio Output Connectors
This output may be connected to a Rear Monitor with a volume control or an
auxiliary audio preamp. This is used to monitor the DVD audio while the main
audio system is being driven by another source (such as Radio or CD).
Red (R)
• Ai-NET Connector (Black)
Connect this to the output or input connector of other product (AV head unit,
Head unit, Digital Audio Processor or DVD Player DVA-5205) equipped with
Ai-NET.
• Remote Control Eye Jack
Connect this to the remote control sensor unit. Not used when using a monitor
with a built-in remote control sensor unit. A remote control sensor unit is needed
when a monitor or navigation unit made by other company is connected.
• Ai-NET Connector (Gray)
Connect this to the output or input connector of other product (CD Changer)
equipped with Ai-NET.
REMOTE IN • Remote Control Input Lead
White/
This lead is used in combination with the Ai-NET compatible AV head unit or
Brown
the ALPINE monitor with a remote control output lead.
• Ground Lead
GND
Connect this lead to a good chassis ground on the vehicle. Make sure the
Black
connection is made to bare metal and is securely fastened using the sheet metal
screw provided.
BATTERY
• Battery Lead
Yellow
Connect this lead to the positive (+) post of the vehicle's battery.
• Switched Power Lead (Ignition)
Connect this lead to an open terminal on the vehicle's fuse box or another
IGNITION
unused power source which provides (+)12V only when the ignition is turned on
Red
or in the accessory position.
When connecting with the Ai-NET compatible AV head unit or the Ai-NET
compatible head unit, do not connect the ignition lead.
FR
Remote Control Eye
To remote control output
lead
Connect to a metal part of
ES
chassis body with a screw
Ignition Key
DE
IT
SE
47
-EN