Searching By Elapsed Time; Chapter/Track/Title Repeat Playback - Alpine DHA-S680 Manual De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Convenient Functions
ENT
RPT
DISC
DISC UP

Searching by elapsed time

Use this function to search by specifying the
elapsed time.
1
During playback, press the GO TO button.
The mode switches each time the button is
pressed.
Select "TIME".
DVD Video
TITLE
CHAPT
Video-CD/CD
TRACK
TIME
Normal playback
2
Input the elapsed time from which you want to
start playback using the number keys ("0" to
"9").
(Input the hours first, followed by the minutes,
then the seconds.)
(When 1 hour, 30 minutes is input as the elapsed
time)
16
-EN
All manuals and user guides at all-guides.com
3
AUDIO
5
ANGLE
DN
CLR
0
9
DVD
Video CD
CD
TIME
Normal playback
NOTES
• To input the elapsed time, the "+10" key is not used.
Use the number keys "0" to "9".
• Press the CLR button to delete the last digit in the
elapsed time. Press the CLR button for at least 2
seconds to erase all the set times.
• Press the RTN button to cancel the elapsed time
search mode and resume normal playback.
• With DVDs, the precision of the elapsed time search
function differs from disc to disc.
• With video discs containing playback control (PBC),
function of "searching by elapsed time" is not
available under the PBC ON status. Press the
MENU button to turn the PBC function off.
3
Press the ENT button.
Playback starts from the specified elapsed time.
Chapter/track/title
repeat playback
Use this function to play the disc's titles, chapters
or tracks repeatedly.
1
During playback, press the RPT button.
The repeat mode switches each time the button
is pressed.
DVD
RPT CHAPT
RPT TITLE
RPT OFF
CD
Video CD
RPT TRACK
RPT DISK
RPT OFF
NOTES
• The track/disc repeat modes cannot be used on video
CDs with playback control (PBC). Press the MENU
button to turn the PBC function off.
• For some discs it is not possible to switch the repeat
mode.
• For CDs, if repeat is OFF, there will be an automatic
changeover to the next disc after the disc finishes
playing.
For DVD and video CD, discs will not be switched
even if repeat is OFF. Use the remote control to
switch these discs. For further information about disc
switching, see "Selecting the disc" (on Page 11).
DVD
Video CD
CD
The chapter is
played repeatedly.
The title is
played repeatedly.
The mode returns
to normal playback.
(setting at factory
shipping)
The track is
played repeatedly.
The entire disc is
played repeatedly.
(setting at factory
shipping)

Publicidad

Tabla de contenido
loading

Tabla de contenido