Kit Assembly - Metra 95-7015CHG Instrucciones De Instalación

Double DIN radio provision
1. Attach the brackets to the radio
housing trim panel using the
(4) supplied #8 x 3/8" screws.
(Figure A)
2. Slide the radio into the bracket/
radio housing assembly and secure
to the assembly using the screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
4. Reassemble dash in reverse order
of disassembly.
95-7015CHG

Kit Assembly

(Figure A) (Figure B)
3