Accessories - RIDGID 1224 Manual Del Operador

1224 Pipe and Bolt Threading Machine
Motor .............................Induction type, 1
RPM 120V, Single phase AC
(60 Hz only), 240V available
on request, 115V-220V-240V
(50 Hz available on request)
CAUTION
Shifting should be done with machine idling. DO
NOT operate shift knob while under load.
NOTE! Shift knob is in 36 RPM position when threading 2"
pipe or less. When threading 2
pipe or other high torque applications such as
stainless steel or 30 RC rod, shift knob must be in
12 RPM position.
Weight ...........................416 lbs.
1 Gallon NuClear Oil
NOTE! Use of RIDGID Thread Cutting Oil is essential for
producing high quality threads and maximizing
die life. For information concerning its use and
handling, refer to the labels on the oil containers.
Disposal of the oil should be in accordance with
government regulations.

Accessories

Stands:
No. 100 ...................4 legs w/tray
No. 150 ...................2 wheels w/tray
No. 200 .....................2 wheels w/enclosed cabinet
No. 419 Nipple Chuck (Right Hand Only):
Size Nipples..............2
Minimum
Nipple Length...........3
Maximum
Nipple Length...........7
No. 725 Cut-Grooving Die Head
Pipe Capacity ...........2
Through-The-Head Oiling
20.25
Figure 2 – 1224 Machine Dimensions
/ Hp at 1750
1
2
" to 4" standard
1 /
2
", 3", & 4"
1 /
2
"
1 /
4
"
1 /
2
" through 4"
1 /
2
43.69
Ridge Tool Company • Elyria, Ohio • U.S.A.
No. 819 Nipple Chuck (Right Hand Only):
Pipe Adapters ........... 1 /
Stud Adapters.......... 1 /
/
1
1 /
NOTE! No. 819 Nipple Chuck is used for threading close
nipples
No. 766
Blade-Type Cutter ......... 1 /
Pipe Supports:
VJ-99 ......................28
RJ-99 ......................30
Threading pipe w/#161 geared threader and 840A
Drive Shaft
No. 161 Geared
Threader..................Threading 4
No. 840A Universal
Drive Shaft..............47" closed, 56" extended
No. 450 Tristand
Chain Vise .............. 1 /
No. 27 Vise ............. 1 /
No. BC610 Vise ...... /
1
No. BC810 Vise ...... 1 /
No. 318 Oiler ............Stops oil waste, keeps dies
flooded.
No. 161 Geared
Threader..................Threading 4
Die Heads:
No. 711 or 911 ......... 1 /
or BSPT/BSPP
No. 714 or 914 .........2
or BSPT/BSPP Self-Opening
No. 713 or 913 ......... 1 /
No. 541 ................... /
1
No. 542 ...................1
18.42
15.50
28.84
" through 2"
4
" through 2" UNC
4
" through 1 " UNF
/
1
4 2
" through 2" BSW
4
" through 4"
4
" – 52 "
1 / 1 /
4 2
" – 54 "
/ /
1 3
2 4
" to 6" pipe
1 /
2
" – 5" Capacity
8
" – 6" Capacity
8
" – 6" Capacity
4
" – 8" Capacity
2
" to 6" pipe
1 /
2
" – 2" right hand NPT/NPSM
2
" – 4" right hand NPT/NPSM
1 /
4
" – 2" left hand NPT or BSPT
4
" – 1" Bolt Die Head
4
" – 2" Bolt Die Head
1 /
8
11.92
5