Printing A Picture - Sony UPX-C200 Manual De Instrucciones

Printing a Picture

The picture just taken can be printed with the procedure
below.
1
Press the PRINT button.
A layout display appears.
Radio wave strength indicator
1. Sony UP-DX100
COLOR
1. 151x101.6mm
Print size
You can check the radio wave strength.
: The radio wave strength is good.
: The radio wave strength is a little weak, and
data transmission may require a long period of
time.
Do not move the camera and printer until data
transmission is finished.
If the layout display does not appear, the radio wave
is too weak to transmit the image data. Put the
camera and printer more closely together, and press
the PRINT button again.
2
Select the print size using the SIZE button.
1) Press the SIZE button.
The layout display of the selected size appears.
2) Press the SIZE button repeatedly until the
desired size appears.
For details on the size of printouts, see "Setting the
Frame (FRAME)" on page 42.
20
Operation
3
2
1,5
P LA Y
C A M E
R A
W
T
M E N U
M O N IT
E N TE O TR
R
(P A L)
LC D
V ID E O
O U T
4
EXIT
MENU
Selection of the COLOR/
B/W button
The number of sheets
x1
to be printed
3
Select COLOR or B/W by pressing the COLOR/
B/W button.
Each time you press the button, the selection is
toggled.
COLOR: For printing a picture in color
B/W: For printing a picture in black and white
4
Press v or V of the control button to set the number
of sheets to be printed.
5
Press the PRINT button again.
Picture data are transmitted to the printer, and
"TRANSMITTING" and the progress bar appear
on the LCD.
While the CANCEL button is lit in orange, you can
cancel data transmission by pressing the ENTER
button.
When data transmission ends, the CANCEL button
changes to gray. The printer checks the print pack
then starts printing.
Notes
• Once the CANCEL button changes to gray, you
cannot cancel the print operation.
• Do not touch any button on the camera while the
CANCEL button is gray.
Once printing begins, "TRANSMISSION END. PUSH
MENU KEY TO CONTINUE." appears on the LCD of
the camera. Press the MENU or control button to remove
the message.
If the PLAY/CAMERA switch is set to CAMERA, the
quick-review display is retrieved. Once printing ends,
you can print the same picture again.
If multiple printers are used, you can send the data to
another printer before printing ends.
You can take another picture during printing. To take
another picture, press the release button halfway or the
zoom lever to release the quick-review display.
If the switch is set to PLAY, a playback picture is
retrieved.
Selection of the print size and COLOR/
B/W
You can select the print size and COLOR or B/W before
pressing the PRINT button to display the layout display.
Press the SIZE or COLOR/B/W button, and press it
again while the print size or COLOR or B/W is
displayed on the LCD. Then press the PRINT button to
print the picture.