Sony UPX-C200 Manual De Instrucciones página 25

7
Select a picture to be protected by pressing b or B
of the control button.
8
Check that ON is selected, and press ENTER of the
control button.
If not selected, select ON by pressing v of the
control button, and press ENTER of the control
button.
The protect mark
When the selected picture has been protected, the
protect mark appears, and the OFF or RETURN
button is displayed on the LCD.
To protect the other pictures
Repeat steps 7 and 8 above.
Protecting all pictures
1
Set PLAY/CAMERA switch to PLAY.
2
Set the POWER switch to ON.
3
Press any button to turn off the Bluetooth display.
4
Press the MENU button.
The Menu display appears.
5
Select PROTECT ALL by pressing v or V of the
control button.
6
Press ENTER of the control button.
The Protect All display appears.
7
Select ON by pressing v of the control button.
8
Press ENTER of the control button to protect the all
pictures.
The protect mark appears.
Protecting a picture on the nine-picture
multiple display
1
Set the PLAY/CAMERA switch to PLAY.
2
Set the POWER switch to ON.
3
Press any button to turn off the Bluetooth display.
4
Press the W side of the zoom lever.
The nine-picture multiple display appears.
appears.
5
Press the MENU button.
The Menu display appears.
6
Select PROTECT by pressing v or V of the control
button.
The nine-picture multiple display appears, and the
cursor blinks at the currently selected picture.
7
Select a picture to be protected by pressing b, B, v
or V of the control button, and press ENTER of the
control button.
The Protect display appears.
8
Check that ON is selected, and press ENTER of the
control button.
If ON is not selected, select ON by pressing b of
the control button, then press ENTER of the control
button.
The protect mark appears on the picture selected in
step 7, and the Menu display is retrieved.
Retrieving the Menu display
Select RETURN by pressing v or V of the control
button on the Protect or Protect All display, and press
ENTER of the control button.
To finish setting the protection
Press the MENU button.
Deleting a protected picture
If you wish to delete a protected picture or pictures,
release the protection.
1
Display the Protect display, and select a picture
whose protection is to be released by pressing b or
B of the control button, or display the Protect All
display.
For details on displaying the Protect or Protect All
display, see "Protecting pictures one by one" on
page 24, "Protecting all pictures" on page 25 or
"Protecting a picture on the nine-picture multiple
display" on page 25.
2
Check that OFF is selected, and press ENTER of
the control button.
The protect mark disappears, and the protection is
released.
25
Operation