Turning Off The Power; Turning The Camera Off - Sony UPX-C200 Manual De Instrucciones

Turning Off the Power

When you finish your operation, set the printer to
standby mode and turn the camera off.
Setting the printer to standby mode
Press the on/standby button. The lamp goes out, and the
printer is set to standby mode.

Turning the Camera Off

Set the POWER switch to OFF.
The camera stores the latest setting data in memory and
turns the power off completely. While the camera is
storing data, the clock appears on the LCD, and the
standby lamp is lit. During transfer of data for storage,
do not disconnect the AC power adaptor or remove the
batteries.
Note
If you cut off the power supply by disconnecting the AC
power adaptor or removing the batteries during transfer
of data for storage, setting data may not be stored in
memory, and the previous settings may be retrieved. If
you turns the power on or off by connecting or
disconnecting the AC power adaptor, the latest setting
data are not stored in memory.
26
Operation