Master Reset - Siemens SITRANS LR560 Guia De Inicio Rapido

Electronic Device Description (EDD)
SITRANS LR560 requires the EDD for AMS Device Manager version 9.0.
Note:
Check the product page of our website at: www.siemens.com/LR560, under Support >
Software Downloads, for the latest version of EDD: SITRANS LR560 FF - Foundation Fieldbus -
AMS V9.0.
1) Check that you have the latest version of the EDD for AMS Device Manager that matches
the firmware revision of your device. [Navigate to Firmware Revision (2.2.2) to access it
via the local user interface]. If necessary download the EDD from the product page listed
above.
2) Save the files to your computer, and extract the zipped file to an easily accessed location.
3) Launch AMS Device Manager – Add Device Type, browse to the unzipped EDD file and
select it.
4) If desired, enter a new device tag. The device is shipped with a unique tag, consisting of a
manufacturer id and serial number
the device operational.
To change Device Tag:
a) Launch AMS Device Manager – AMS Device Manager.
b) From Device Connection View, right click on the FF Network icon and select Rebuild
Hierarchy.
c) Right click on the device icon, and choose Rename from the menu.
d) Enter a device tag and press Enter.
The Device Tag described above is distinct from the Tag that describes each block type
Note:
Identification
(located in the
Startup
1) Launch AMS Device Manager
a) Launch AMS Device Manager – AMS Device Manager.
b) From Device Connection View, right click on the FF Network icon and select Rebuild
Hierarchy.
c) If you wish to rename the device, right-click on the device icon and select Rename
from the menu, enter a new device tag, and click Enter.
d) Double-click the device icon. The Configure/Setup menu opens at the device
Identification dialog window. At initial startup, the Block Status is Out of Service.

2) Master Reset

Notes:
• We recommend performing a Master Reset before configuring a new device.
• RESOURCE and LTB Blocks must be in Out of Service Mode before a Master Reset can be
performed.
a) Navigate to Configure/Setup > Resource Block > Operation and click Methods to
open the dialog window.
1)
The device tag is read-only via local operation.
7ML19985XR81
1)
. It is not necessary to change the device tag to make
folder of each block).
SITRANS LR560 (FF) – QUICK START MANUAL Page EN-17