Program Mode; Quick Start - Siemens SITRANS LR560 Guia De Inicio Rapido

PROGRAM mode

Using the LDI push buttons, press
through the menu using
To edit a number
Notes: With the Enter icon
delete the right-most digit; press
1) Navigate to the desired parameter and press
and edit it. The value will be highlighted.
2) Press or to delete the highlighted value.
3) With the Enter icon highlighted
4) Use or to modify the highlighted digit. Scroll up past 9 to
reach the decimal point.
5) Press to select the + or - sign and highlight it. Use
6) With the Enter icon highlighted
7) When the value is complete, press
to accept the value.
To modify a text string
1) Navigate to the parameter you wish to modify and press
highlighted.
2) Follow the same steps as above, to add, delete, or modify characters.
Quick Start Wizard

1. Quick Start

Note: Default values are indicated by an asterisk (*) in the tables below, unless explicitly
described.
1.1. Quick Start Wizard
1) Press twice to navigate to Quick Start (1.) and open
Quick Start Wizard (1.1.)
2) At each step, press
directly to the next item,
or to open Edit mode: the current selection is
highlighted.
3) Scroll to desired item and press
4) At any time, you can press
Measurement mode.
Page EN-14 SITRANS LR560 (FF) – QUICK START MANUAL
to enter Program Mode and open menu level 1. Scroll
, , , .
highlighted, press
to accept the value; press
press
press
until the Enter icon is highlighted
to accept default values and move
to store the change, then press
to go back, or
to insert a digit on the right; press
to cancel.
twice to open
to add a digit.
or to modify it.
to add a digit on the right.
to edit it. The string will be
to cancel and return to
to
, then press
to continue.
7ML19985XR81