Organizational Measures; Protective Devices; Informal Safety Measures; Operator Work Place - Parker EOMAT PRO Manual De Manejo

EOMAT PRO

1.9 Organizational measures

Personal protective equipment is to be supplied by the operating company and must
always be fully functional.
All existing safety equipment should be checked regularly.

1.10 Protective devices

All protective devices must always be properly installed and functioning correctly before
the machine is put into operation.

1.11 Informal safety measures

- These operating instructions should always be kept by the machine.
To expand upon the operating instructions, the locally applicable regulations for the
-
power supply, for accident prevention, for occupational safety, and for
environmental protection should be observed and available.
- All of the safety and warning notices on the machine should be kept in a legible
condition and replaced if necessary.

1.12 Operator work place

In normal operation, the operator work place is directly in front of the machine. The
controls are arranged so that they can be operated from this position.
For installation and maintenance, no special work place is required.
Seite
37
EOMATPRO/MANUAL