Packaging, Transportation And Storage; Packaging; Transportation; Storage - Parker EOMAT PRO Manual De Manejo

EOMAT PRO
7

Packaging, transportation and storage

7.1 Packaging

The machine is delivered on a special wooden pallet for packaging and

transportation.

7.2 Transportation
Transport in original packaging, according to 7.1:
The machine can be transported using a forklift.
Transporting without original packaging materials:
The EOMAT PRO can be carried by two persons using the carrying handles
mounted on the sides. Safety shoes are required!

7.3 Storage

The machine should only be stored in a closed, dry room. It should be protected
against mechanical damage.
Air: max. 80% relative humidity, with no condensation.
Ambient temperature: +5 ° C to +45 ° C
If storing the machine for more than 14 days, you must package and protect the
machine particularly well.
8

Machine installation

This machine requires a set-up area of approx. 700 mm x 650 mm.
The recommended height for the sub-structure to mount the machine on, is 840
to 930 mm.
Before starting to install the machine it should be checked for any transport
damage.
The set-up location must be capable of supporting the weight of the machine
and tool.
All machine connections (cables, foot switch cable) should be installed and
arranged so that they are not in the way or obstacles.
The machine should only be operated in closed, dry rooms.
The machine should rest on a level, flat surface.
When transporting machines containing fluids, appropriate measures must be
taken to prevent environmental damage from leaks.
Seite
45
EOMATPRO/MANUAL