Assembly; Assembly Check; Notes On Safety During Assembly; Maintenance, Cleaning And Repairs - Parker EOMAT PRO Manual De Manejo

EOMAT PRO

13.2 Assembly

The instructions for assembly using the EOMAT PRO can be found in the EOMAT PRO
brochure which was included with these operating instructions.

13.3 Assembly check

Information can be found in the current Parker TFDE Catalogue 4100 under assembly
tools.

13.4 Notes on safety during assembly

Two-hand operation: Hold the tube, press and hold the start button.
When using a foot switch: Keep a distance of at least 1.5 m between the foot switch
and the machine.
Only operate with one person!
Failure to follow this guidance can result in crush injuries.

14 Maintenance, Cleaning and Repairs

Always remember to pull out the power cord from the wall socket before
beginning maintenance or repair work
14.1

Regular maintenance

• Regular machine maintenance:
Plant's metalworking shop
• Hydraulic components:
Plant's metalworking shop
• Electrical switching circuit components
Plant's electrical shop
Seite
51
EOMATPRO/MANUAL