Residual Energy; Structural Changes To The Machine; Cleaning The Machine (And Disposal); Accident Prevention Regulations, Workplace Safety Regulations - Parker EOMAT PRO Manual De Manejo

EOMAT PRO

2.6 Residual energy

Note that even after the machine is switched off, or when it is not in use, there may be
residual energy present. This may be, for example:
• In the hydraulic pressure lines and pressure vessels
• In the power cables and capacitors

2.7 Structural changes to the machine

• No changes, additions or modifications may be made to the machine without the
approval of the manufacturer.
• Machine components which are not in perfect condition should be replaced
immediately, or the manufacturer should be contacted.
• Only use original spare parts.

2.8 Cleaning the machine (and disposal)

Cleaning: - before cleaning, always unplug it from the power supply
- only used alkali-based cleaning agents
Disposal: - during removal and disposal the relevant
qualifications (see table in chapter 16) must be observed.

2.9 Accident prevention regulations, Workplace safety regulations

The relevant accident prevention regulations and workplace safety regulations must be
observed by the operating company.
Switch the machine off immediately in the event of an accident.
Seite
40
EOMATPRO/MANUAL