Noise/Vibration Information; Battery Charging - Würth HKS 18-A Traducción Del Manual De Instrucciones De Servicio Original

OBJ_BUCH-3291-001.book Page 20 Friday, September 8, 2017 12:22 PM
Tool Specifications
Circular Saw
Art. No.
Rated voltage
No-load speed
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
Spindle lock
Use with guide rail system
Base plate dimensions
Saw blade diameter
Blade body thickness, max.
Blade thickness, min.
Tooth thickness/setting, max.
Tooth thickness/setting, min.
Mounting bore
Weight according to EPTA-
Procedure 01:2014
Permitted ambient temperature
– during charging
**
– during operation and
during storage
Recommended batteries
Recommended chargers
* depending on the battery pack being used
** limited performance at temperatures <0 °C

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-5.
Typically the A-weighted noise levels of the product are:
Sound pressure level 80 dB(A); Sound power level 91 dB(A).
Uncertainty K =3.0 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-5:
2
Cutting wood: a <2.5 m/s , K=1.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or insertion tools or
is poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
HKS 18-A
when it is running but not actually doing the job. This may sig-
5700 513 X
nificantly reduce the exposure level over the total working
V= 18
period.
-1
min 3400
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the acces-
mm 57
sories, keep the hands warm, organisation of work patterns.
mm 42


mm 252 x 194
mm 165 We declare under our sole responsibility that the product
described under "Tool Specifications" complies with all
mm 1.7
applicable provisions of the directives 2011/65/EU,
mm 1.0
2014/30/EU, 2006/42/EC including their amendments
mm 2.6
and is in conformity with the following standards:
mm 1.7
EN 60745-1:2009+A11:2010,
mm 20
EN 60745-2-5:2010,
EN 55014-1:2006+A1:2009+A2:2011,
kg 3.4/4.1*
EN 55014-2:1997+A1:2001+A2:2008,
EN 50581:2012.
°C 0...+45
Technical file (2006/42/EC) at:
Adolf Würth GmbH & Co.KG, PPT,
°C –20...+50
Reinhold-Würth-Straße 12-17
AKKU-LI-CV-
74653 Künzelsau
18V/X.X Ah
GERMANY
AL XX-CV-LI
www.wuerth.com
Frank Wolpert
Prokurist/
Leiter Produktmanagement
Authorized Signatory/
Head of Product Management
Künzelsau: 25.08.2017
2
 Use only the chargers listed in the tool specifi-
Note: The battery supplied is partially charged. To ensure
full capacity of the battery, completely charge the battery in
the battery charger before using your power tool for the first
time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure
does not damage the battery.
EC-Declaration of Conformity
Dr.-Ing. Siegfried Beichter
Prokurist/
Leiter Qualität
Authorized Signatory/
Head of Quality

Battery Charging

cations. Only these chargers are matched to the lithium-
ion battery of your power tool.
20