Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Presetting Automatic DVD Sound Increase
Remote
Level
ONLY
The DVD sound is sometimes recorded at a lower level than
for other discs and sources. You can set the increase level for
the currently loaded DVD, so you do not have to adjust the
volume every time you change the source.
DVD LEVEL
9
(at the same time)
NORMAL
Original recording level.
MIDDLE
Output level is increased (less than "HIGH").
HIGH
Output level is increased (more than
"MIDDLE").
• Once the current DVD is ejected, this setting is canceled
and set automatically to "NORMAL."
Adjusting the Audio Input Level
If the sound from the component connected to the
AUX jacks is too loud or is not loud enough when changing
from another source to "AUX," you can change the audio
input level through the AUX jacks (without changing the
volume level).
While the "AUX" is selected as a source...
2
sec.
SET
AUX LVL 1
AUX LVL 2
AUX LVL 1
Select this when the sound is too loud
(initial setting).
AUX LVL 2
Select this when the sound is not loud
enough.
18
NORMAL
MIDDLE
HIGH
Remote
ONLY
Changing the Display Brightness
You can dim the display window.
DIMMER
DIM 1
DIM OFF
(Canceled)
DIM 1
Dims the display.
DIM 2
Erases the display illumination.
AUTO DIM
Erase the display illumination a few
seconds after disc playback starts.
• The display illuminates when
playback stops.
Changing the Picture Tone
While showing a playback picture on the TV screen, you can
select the preset picture tone, or adjust it and store your own
likeliness.
To select a preset picture tone
1
Activate VFP.
VFP
6
(at the same time)
2
Select a preset picture tone.
NORMAL
Normally select this.
CINEMA
Suitable for a movie source.
USER1/USER2
You can adjust parameters and can
store the settings (see page 19).
Remote
ONLY
DIM 2
AUTO DIM
Remote
ONLY
NORMAL
0
GAMMA
0
BRIGHTNESS
CONTRAST
0
0
SATURATION
0
TINT
0
SHARPNESS
On the TV screen
NORMAL
CINEMA
USER2
USER1
Publicidad
Capítulos
Tabla de contenido
