Enlarging The Picture (Zoom); Adjusting The Picture Quality (Vfp) - JVC EX-A1 Manual De Instrucciones

Enlarging the picture
(ZOOM)
(only for moving image)
1
Press ZOOM during playback or
while paused.
• Each time you press the button, the picture
magnification will be changed (
for a VCD and SVCD).
2
Select the portion you want to
see by using cursor 5 // /2 /3 .
• This operation cannot be carried out when
the magnification is
• To resume normal playback, select
Step 1.
Adjusting the picture
quality (VFP)
1
Press VFP during playback or
while paused.
"VFP SET" will appear on the display window
on the main unit and the current setting will be
displayed on the TV screen.
• Gamma: Controls brightness of neutral tints
while maintaining brightness of dark and
bright portions.
• Sharpness: Controls screen sharpness.
2
Press cursor2 /3 to select VFP
mode.
• It is recommended to select "NORMAL"
usually, or "CINEMA" in a dark room. When
either "NORMAL" or "CINEMA" is selected,
go to Step 7.
• When either "USER 1" or "USER 2" is
selected, the adjustment can be carried out
in detail in the operations after Step 3.
1.5 only
M
1.
M
M 1 in
Advanced operations
3
Press cursor5 // to select an
item to be adjusted.
4
Press ENTER.
Example:
GAMMA
5
Press cursor5 // to change the
value.
6
Press ENTER.
To adjust other items, go back to Step 3.
7
Press VFP.
NOTE
• If no operation is made for several seconds during
the procedure, the settings made so far will be
automatically stored.
• "VFP" is an abbreviation of "Video Fine Processor".
TV screen
26