Use Your Robovac With Amazon Alexa / The Google Assistant - EUFY RoboVac X8 Hybrid Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
2. Wet the mopping cloth and wring it until it does not drip. Insert the cloth along the
bracket slot and stick it firmly.
• Use either the washable mopping cloth or the disposable cloth for mopping.
3. Open the water inlet cover to fill the water, then close the cover.
• Do not use any cleaning solution other than those specified by eufy, as it
may damage RoboVac.
4. Install the water tank into the bottom of RoboVac until a click is heard.
• The mopping mode is only intended for a clean floor without stubborn
stains. To achieve a better mopping effect, it is recommended to clean
the floor with RoboVac three times before installing the mopping
module.
32
5. Select a cleaning mode to start cleaning.
RoboVac automatically sweeps and mops in the selected mode.
6. When RoboVac finishes working and returns to the Charging Base, remove the
water tank, empty any remaining water, and clean the mopping cloth to prevent
mildew or unpleasant smells. The disposable mopping cloth is for single-use only. For
how to clean and maintain the water tank, refer to the "Cleaning and Maintenance"
section in this manual.
Use Your RoboVac with Amazon Alexa /
the Google Assistant
Amazon Alexa and the Google Assistant are smart voice assistants that enable you to
control RoboVac with your voice.
Before you start, make sure that:
• RoboVac is attached to the Charging Base to ensure there is enough power.
• RoboVac is connected with the EufyHome app.
• You have an Alexa-enabled device (i.e. Amazon Echo, Echo Dot and Amazon Tap,
Echo Show, Echo Spot) or a device enabled with the Google Assistant (i.e. Google
Home, Google Home Mini). These devices are sold separately.
• The Amazon Alexa app or Google Home app is already installed on your smart
device, and you have created an account.
To control RoboVac with Amazon Alexa or the Google Assistant
1. Open the EufyHome app and tap "Smart Integrations" in the top left.
2. Follow the on-screen instructions to complete the setup.
Currently this feature only supports English, German, French, and
Spanish. You can check regularly if more languages are supported at
https:/ /www.eufylife.com/support/.
English
33

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido