Use Your Robovac With Amazon Alexa / Google; Assistant - EUFY RoboVac G20 Hybrid Manual Del Usuario

6
When RoboVac finishes working and returns to the Charging Base, press the
release button to remove the dust collector and the water tank.
7 Remove the water tank and put the dust collector back into the main unit.
After mopping, remove the water tank, empty any remaining water and
clean the mopping cloth to prevent mildew or unpleasant smells. For
how to clean and maintain the water tank, refer to the "Cleaning and
Maintenance" section in this manual.
22 EN

Use Your RoboVac with Amazon Alexa / Google

Assistant

Amazon Alexa or Google Assistant is a smart voice control device that enables you to
control RoboVac with your voice.
Before you start, make sure that:
• RoboVac is attached to the Charging Base to ensure there is enough power.
• RoboVac is connected with the EufyHome app.
• You have an Amazon Alexa-enabled device (i.e. Amazon Echo, Echo Dot and
Amazon Tap, Echo Show, Echo Spot) or a device enabled with the Google Assistant
(i.e. Google Home, Google Home Mini). These devices are sold separately.
• The Amazon Alexa app or Google Home app is already installed on your smart
device, and you have created an account.
To control RoboVac with Amazon Alexa or Google
Assistant
1. Open the EufyHome app and find "Smart Integrations" in the top left.
2. Follow the on-screen instructions to complete the setup.
• Currently this feature only supports English, German, French, and
Spanish. You could check regularly if more languages are supported at
https:/ /www.eufylife.com/support/.
EN 23