Publicidad
Idiomas disponibles
Idiomas disponibles
User's Manual canoe
• A recreational vessel designed for use on internal waterways with an expected wind strength reaching Grade
4 on the Beaufort Scale inclusive and a determining wave height of up to 0.3 metres inclusive, with occasional
waves up to 0.5 metres of height caused e.g. by vessels passing by.
• The boat has been manufactured in compliance with the EN ISO 6185-1 Standard, Category IIIA.
• Related standards: EN ISO 10087, EN ISO 10240, EN ISO 14945.
Dear Customer,
This manual will help you to easily and safely master your vessel.
It contains a detailed description of the vessel, the supplied or built-in
equipment, its sets as well as information about its control and mainte-
nance. Please read it carefully, thereby getting to know the boat before
actually using it.
If this is your fi rst vessel or you have changed the type of vessel and
do not know this type well, please get acquainted with its maintenan-
ce and control prior to your fi rst individual use of the vessel so that it
is safe and comfortable. Your dealer or the National Yacht Federation
or club will recommend you appropriate training courses or qualifi ed
instructors.
Do not pull o until the expected sailing conditions (wind strength and
wave height) are appropriate for the construction category of your ve-
ssel and you and your crew are able to control it in these conditions.
Please store this manual in a safe place and hand it over to the new
owner should you sell the vessel.
1. Table of Specifi cations
(indicatice values)
Length (cm)
Width (cm)
Number of air chambers
Dimensions - packed in carry bag (cm)
Dimensions - packed in cardboard (cm)
Maximum operational pressure
Weight (kg)
Load (kg)
Maximum number of people
Draught (cm)
The highest anchor above surface (cm)
2. Technical Description
Standard version - see Picture 1
The SCOUT infl atable canoe consists of three main air cham-
bers. Two infl atable fl at sidewall cylinders (1) and an infl ata-
ble V-profi le bottom (2). The main air chambers are equi-
pped with valves (3) for infl ating and defl ating the canoe,
regulating pressure in the chambers by releasing the valves
and measuring the pressure in the chambers. The bottom of
the canoe is also equipped with a safety relief valve (4). The
canoe also contains three seats (5). The front and rear seats
are equipped with fastening straps (6) for use on wild wa-
ter; the central seat has no straps. The seats and fastening
straps are attached to fi xtures (9) inside the canoe by means
of screws (7) and plastic nuts (8) - see Details A and B. The
fastening strap consists of the actual strap (6) and a plastic
buckle (10) and passes through the bottom fi xture (11). T-sha-
8
SCOUT
/ SCOUT ECONOMY
Table of Contents:
SCOUT
445
95
3
70 × 45 × 30
70 × 47,5 × 32
0,02 MPa [0,2 Bar/3 PSI]
25
450
3
15
65
ped aluminium bracings - T-BONES (12) are located below
each seat.
Safety ropes (13) with tubular handles (14) for carrying the
canoe are located on the bow and stern. Flexible loops with
plastic balls (15) are designed for attaching a coiled ancho-
ring rope (16) - see Detail C. Belt fi xtures (17) are designed
for fastening baggage. The rear part of the bottom contains
a drain sleeve (18). The sleeve can be closed by rolling it up
and fastening with a buckle.
The canoe is supplied in a carrying bag. The accessory kit
also includes a foam sponge in a mesh bag, 2 fl exible loops
with balls (19) to attach the pump - see Detail D, metal key
for valves, a gluing set containing adhesive, patches, san-
dpaper, a valve adapter, a spare screw and plastic nut for
attaching the seat, a spare screw for the T-BONES, and re-
pair instructions.
VERSION 9/2021
GB
Page 8
SCOUT ECONOMY
445
95
3
70 × 45 × 30
70 × 47,5 × 32
0,02 MPa [0,2 Bar/3 PSI]
24,5
450
3
15
65
8
9
9
10
10
10
10
10
10
10
11
Publicidad
Capítulos
