Positioning The Movement Sensor Pad - Angelcare AC-SP El Manual Del Propietario

STEP 1 - POSITIONING THE MOVEMENT SENSOR PAD
1.1 - SELECT A LOCATION FOR THE CAMERA
IMPORTANT
Place the cot near a supporting wall and far from air currents. Install the Camera on a
flat, stable surface facing the cot at a distance of at least 1 metre. Make sure to plug the
adapter to the socket outlet nearest to the equipment and that is easily accessible.
1) Insert jack 1 into the Sensor Pad and twist it clockwise to lock it.
jack 1
1.2 - SELECT THE COT LEG TO SECURE THE CORD COVERS
RECOMMENDED
6
5
Figure 1
Use the cot leg by the wall closest to the Camera (Figure 1). In cases where the Camera is
across the room, use the leg closest to the Camera to position the covered wire (Figure 2).
It is always preferable that the covered cord run along a wall.
6
All manuals and user guides at all-guides.com
Place the
Camera at least
1 metre from the
6 5
OR
4
3
2
1
cot
jack 2
4 3 2 1
6
4
3
2
1
Figure 2
jack 3
5