Cembre CS-EU Manual De Uso Y Mantenimiento página 10

7. ACCESSORIES TO ORDER SEPARATELY
Support trolley block pin: It should be mounted on the hole above the wheel.
(Standard with CS-EU-BK version).
Extension
KLE...-CS
Weight
KLE6-CS, KLE32-CS and KLE43-CS extensions: They
hook onto the support trolley and allow work to be
performed in the area surrounding the railway track,
with impact wrenches and drills; the use of the exten-
sions makes it necessary to add suitable weights on
the counterweight carriage so as to make the whole
structure stable and avoid sudden overturning.
KPC-CS1 Weights KIT: They are positioned on the counterweight
carriage to balance the weight of drills or impact wrench mounted
on the support trolley (we recommend the use of these when the
extensions are mounted).
For assembly use the transport handles (D), lift the sup-
porting surface and position it by inserting the locating
plates (E) and the pin (F) into the corresponding seats of
the carriage and the 3rd wheel bar; once in place turn
piston (G) to lock the supporting surface.
Supporting
surface
D
F
Weight
PSCS-EU supporting surface: Can be ap-
plied to the base of the support trolley with
a quick coupling system and allows the
transport of impact wrenches and drills up
to a max. of 25 kg.
Support
block pin
D
G
E
10