First Things First; Safety Terms, Their Symbols And Meaning In These Instructions - Rapid UNIVERSO 1500 Manual De Instrucciones

1

First things first

Purpose of this
manual
Before
commissioning
Use in accordance
with the specified
purpose
EN
Other documents
1.1

Safety terms, their symbols and meaning in these instructions

Danger
Warning
Caution
Attention
Note
136
The operating instructions contain important information enabling you to operate the
machine safely, correctly and economically. By paying attention to the instructions,
you will help to prevent accidents, reduce repair costs and downtimes, extend the
service life and increase the reliability of the machine. The operating instructions are
included in the scope of delivery of the machine.
The operator must read the operating instructions for the machine and from the
engine manufacturer before putting the machine into operation.
Use for the specified purpose includes:
• use in agriculture, gardening, maintenance of green areas and parks and for
winter road clearance.
• working with attachments approved by Rapid.
• compliance with the operating, servicing and maintenance conditions stipulated
by the manufacturer.
• use of original Rapid spare parts.
Any other kinds of use shall be deemed to be not in accordance with the specified
purpose. The manufacturer cannot be held liable for any damage resulting from such
use. The risk in such cases shall be borne solely by the user.
Reasonably foreseeable misuse includes:
• Towing loads.
• Driving the PTO shaft with turned handlebar.
Spare parts list, article no. 266 252
When used in conjunction with the term "Danger", this symbol indicates an
immediate danger, which results in severe injury or death.
When used in conjunction with the term "Warning", this symbol indicates a potentially
dangerous situation, which results in severe injury or death.
When used in conjunction with the term "Caution", this symbol indicates a potentially
dangerous situation, which results in minor injury or damage to equipment.
When used in conjunction with the term "Attention", this symbol indicates a situation
which results in damage to equipment.
This symbol provides important information relating to the technically correct and
efficient use of the machine.
Machine no. from CH 1001