Malfunctions - Rapid UNIVERSO 1500 Manual De Instrucciones

7.1

Malfunctions

EN
158
Engine is not starting!
• PTO shaft control lever not in starting position.
• Choke in wrong position.
• Fuel valve not opened.
• Fuel tank empty or deposits in the carburetor.
• Fuel hose or fuel filter clogged.
• Spark plug socket not on spark plug.
• Spark plug defective.
• Fault on electrical system.
Engine running, but machine not moving!
• Freewheeling lever in wrong position.
• Not enough hydraulic oil.
Engine misfiring or suddenly stopping!
• Fuel filter clogged.
• Fuel tank empty.
• Fuel valve closed.
• Choke in wrong position.
• Air filter or cooling air suction filter of the engine clogged.
• Water in the water separator.
• Fault on electrical system.
• Temperature protection switch (optional) defective or engine too hot.
Engine running, but attachment unit is not being powered!
• PTO shaft connection sleeve is not engaged.
• PTO shaft control lever in starting position.
If you are unable to remedy the malfunction yourself, you must consult an authorized Rapid
dealer.
Note
Machine no. from CH 1001