Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
6.2
Acceptable operating conditions
– Acceptable ambient temperature range: +5°C to +40°C (41°F to 104°F)
– Acceptable humidity range: 80 % maximum relative humidity for temperatures
up to 31°C (87.8°F), gradually decreasing to 50 % relative humidity at 40°C
(104°F); condensation excluded.
– Acceptable ambient pressure: The furnace is tested for use at altitudes of up to
2000 m above sea level.
6.3
Acceptable transportation and storage conditions
– Acceptable temperature range: -20 °C to +65 °C (-4 to 149°F)
– Acceptable humidity range: Max. 80 % relative humidity
– Acceptable ambient pressure: 500 mbar to 1060 mbar
Use only the original packaging together with the corresponding foam material for
shipping purposes.
Remove the object tray from the firing chamber for transportation,
pack it securely and ship it in the accessories carton with the furnace.
7. Maintenance, cleaning, diagnosis
Chapter 3 of the comprehensive Operating Instructions for this device contains
detailed descriptions of the maintenance, cleaning and diagnostic procedures for
the device.
Only the tasks listed may be carried out by qualified dental technicians or dental
laboratory professionals. All other tasks must be performed by qualified service
personnel at a certified Service Centre.
General information on the control and maintenance tasks
The time for these maintenance procedures depends on the frequency of use and
the working habits of the users. For that reason, the recommended times are only
approximations.
8. Disposal of the device
Chapter 5 of the comprehensive Operating Instructions for this device
contains information about the proper and correct disposal of the
device.
The device must not be disposed of in the normal domestic waste.
Please correctly dispose of old furnaces according to the corresponding
EU council directive. Information regarding disposal may also be found
on the respective national Ivoclar Vivadent website.
11
Publicidad
Tabla de contenido
