2. Introduction / Signs and
Symbols
2.1 Preface
Dear Customer,
Thank you for having purchased the Ivoclar Vivadent
Cap Vibrator. The Cap Vibrator is an advanced technology
product that is characterized by high quality and
precision.
The furnace has been designed according to the latest
industry standards. Inappropriate use may damage the
equipment and be harmful to personnel. Please observe
the relevant safety instructions and read the Operating
Instructions.
We wish you much success and satisfaction with the
Cap Vibrator.
2.2 Introduction
The signs and symbols in these Operating Instructions
facilitate the finding of important information. They have
the following meanings:
Risks and dangers
Important information
Contraindication
2.3 Information regarding the
Operating Instructions
Apparatus:
Cap Vibrator
Target group:
Dental lab professionals
These Operating Instructions facilitate the correct, safe,
and economic use of the unit.
Should you lose the Operating Instructions, extra copies
can be ordered at a nominal fee from your local Service
Center
14
3. Safety First
3.1 Field of application
This chapter is particularly important for staff who work
with the apparatus or who have to carry out maintenance
or repair work.
Risks and dangers
The Cap Vibrator must only be started and
operated when the hood is closed.
Further instructions:
– The appliance may only be used indoors.
– The appliance may only be used at altitudes of up to
4000 m above lea level
– The temperature range for faultless operation is +5 °C
to +40 °C
– Maximum relative humidity of 80 % for temperatures
up to 31 °C
– Voltage fluctuations should not exceed +10 % or
-15 % of the voltage value
– The appliance is not suitable for use in areas where
there is an explosion hazard
3.2 Health and safety instructions
The Cap Vibrator must only be used for the indications
stipulated in chapter 4. Further instructions to assure the
proper use of the Cap Vibrator are as follows:
– The instructions, regulations and notes in these
Operating Instructions must be observed
– The unit must be properly maintained (see chapter 8)