Displaying Technical Information; Using Mheg Application (Uk Only); Screen Saver; Common Interface - Pioneer PDP-505XDE Manual Del Usuario

Enjoying DTV broadcasts

Displaying Technical Information

Use this function to check the hardware/software version
number.
1
Repeat steps 1 to 4 provided for Using Auto Update.
2
Select "Technical Information" ( /

Using MHEG application (UK only)

Some stations bring you programmes with the MHEG
(Multimedia and Hypermedia Expert Group) application
encoded, letting you experience DTV interactively.
1
When provided, the MHEG application will start when
you press any of the colour buttons or m.
• This function is not available when subtitle is activated (see
page 4).

Screen Saver

The screen saver automatically starts when no operation is
performed for 3 minutes while receiving DTV radio channels.
• Press TV/DTV to switch to analogue TV.
• Press any other button to switch to the normal radio
channel screen.
• Programme Timer is active while the screen saver is
displayed.
All manuals and user guides at all-guides.com

Common Interface

To receive scrambled DTV signals you will need a CA module
and a smart card provided by the service provider.
Although CA module types may vary depending on the
then ENTER).
manufacturer, each one of the CA modules supports a certain
kind of encryption system. Your Plasma Display supports CA
modules which are made to work with the DVB standard.
Contact a service provider for the right type of CA module.
Please note that a smart card may only be valid for a single
service provider and due to this, a specific range of channels.
• CA modules and smart cards are neither supplied nor
After inserting a card, leave it in the slot permanently. Do not
remove it from the terminal unless asked to do so. For
instance, your card has to be in the slot when your service
provider wants to download new information to the smart
card.

Inserting a CA Card

Common Interface card slot is located at the rear of the
Media Receiver.
1.
2.
optional accessories from PIONEER.
Hold the tab of the slot cover on the rear of the Media
Receiver, and remove the cover while releasing the tab's
latch.
Tab
Insert the specified CA Module into the Common Inter-
face slot as far as it will go.
01
9
En