Using Electronic Programme Guide (EPG) (for DTV only)
Setting the timer manually
Using the menu, you can also preset digital TV programmes
by specifying their scheduled date and time.
1
Press HOME MENU.
2
Select "Setup" ( /
then ENTER).
3
Select "DTV Setup" ( /
4
Select "Programme Timer" ( /
• The schedule table appears.
Programme Timer
No.
Date
Time
01
- - -. - -. - - -
- - : - - - - - : - -
02
- - -. - -. - - -
- - : - - - - - : - -
03
- - -. - -. - - -
- - : - - - - - : - -
04
- - -. - -. - - -
- - : - - - - - : - -
05
- - -. - -. - - -
- - : - - - - - : - -
06
- - -. - -. - - -
- - : - - - - - : - -
07
- - -. - -. - - -
- - : - - - - - : - -
08
- - -. - -. - - -
- - : - - - - - : - -
09
- - -. - -. - - -
- - : - - - - - : - -
10
- - -. - -. - - -
- - : - - - - - : - -
5
Select a programme number ( /
• You can select any desired programme number.
6
Specify a date ( /
or 0 - 9, then
7
Specify the start hour/minute and end hour/minute
( /
or 0 - 9, then
).
8
Specify a channel number ( /
Programme Timer
No.
Date
Time
01
Mon.05.Jan
12:00-13:00
02
- - -. - -. - - -
- - : - - - - - : - -
03
- - -. - -. - - -
- - : - - - - - : - -
04
- - -. - -. - - -
- - : - - - - - : - -
05
- - -. - -. - - -
- - : - - - - - : - -
06
- - -. - -. - - -
- - : - - - - - : - -
07
- - -. - -. - - -
- - : - - - - - : - -
08
- - -. - -. - - -
- - : - - - - - : - -
09
- - -. - -. - - -
- - : - - - - - : - -
10
- - -. - -. - - -
- - : - - - - - : - -
9
Register the preset settings after all items are set
(ENTER).
• If a preset time is in the past or the channel is locked,
an alert message appears.
• An yellow triangle icon indicates that the recording/
watching may fail due to overlapped presettings.
• If presetting another programme, repeat steps 5 to 9.
• You can preset up to 10 programmes.
10
Press HOME MENU to exit the menu.
All manuals and user guides at all-guides.com
then ENTER).
then ENTER).
Wed.24.Nov 12:34
Channel
Info
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
then
).
).
or 0 - 9, then
).
Wed.24.Nov 12:34
Channel
Info
001 ************
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
• Preset recording/watching begins immediately when
presetting operations are performed within three minutes
of the start of the programme.
• Presettings made using the EPG are automatically shown
in the scheduled table.
• Recording may fail because of watching restrictions
imposed by the CA module.
Priority rules for overlapped presettings
When preset TV programmes are overlapped, the following
two rules are used to determine higher priority. If more than
one of the two rules are met, the rules are applied in the order
1, then 2.
Rule 1: If two presettings are overlapped, the presetting with
the earlier start time is given a higher priority. If two
presettings are sequential, the last portion of the first
programme or the first portion of the second may not
be recorded.
Rule 2: If presettings with the same start time are
overlapped, the presetting with the bigger list
number is given a higher priority.
02
13
En