Maintenance And Service; Cleaning The Cart - Stryker OR Instrucciones De Uso

Maintenance and Service

The following regular maintenance may be performed as needed. Component part lists, circuit diagrams, descriptions,
and calibration instructions are available upon request.
Note: Secure the Connected OR Mount in the monitor stow bracket before removing the monitor.

Cleaning the Cart

It is recommended that the cart be cleaned after each use.
To clean the Connected OR Cart:
1. Disconnect the cart from supply mains.
2. Wipe the cart with a damp cloth or sponge and any of the following:
◦ mild soap solution
◦ mild detergent solution
◦ 70% ethyl or isopropyl alcohol
◦ multipurpose germicidal disinfectant
P44082 Rev. D EN 9